Reliable And Traditional Playground Fencing
A traditional timber fencing option, palisade fencing will help to secure your playground and finishes off any timber play area or playground. Produced at 1m and 1.2m heights with standard, soft close and maintenance gate options available.
Fence consists of posts, rails and pales pressure treated to playground standards.
Fence Panels
Traditional visual appeal.
Constructed from 100mm diameter uprights with 100mm diameter half round pales.
Fence comes flat packed with instructions for assembly.
Stainless steel fixing screws.
Prices supplied per linear meter.
40mm gap between each pale.
Palisade Gate
Constructed from 100mm diameter uprights with 100mm diameter half round pales.
Stainless steel fixing screws.
Secured with Stainless steel latch.
40mm gap between each pale.
If used in the middle of a run of fencing an additional fence post must be ordered as fence posts are required on either side of the gate. If the fence stops at the gate or a corner post is used after the gate then an additional post is not required.
Palisade Self Closing Gate
Self closing mechanism ensures safety for children at playgrounds.
Constructed from 95mm x 95mm square uprights, with 100mm diameter uprights with 100mm diameter half round pales.
Stainless steel fixing screws.
40mm gap between each pale.
Rubber gate stop.
Height: 1000mm or 1200mm
Width: 150mm
Length: 2450mm
Height: 1000mm or 1200mm
Width: 163mm
Length: 1530mm
Height: 1000mm or 1200mm
Width: 145mm
Length: 1420mm
